Test VPS speed

admin

The server is not good, and the experience of using it is poor. The performance of the server has to do with hardware configuration, bandwidth size, bandwidth route, operator, etc. Now renting a server is very common. Any individual can directly rent a server online to use. This also caused an increase in non-industry personnel's needs. There are many servers and agents in various IDC industries on the Internet. Ordinary people find it difficult to distinguish the performance of the server. Therefore, a simple and easy-to-use test method is needed for users to quickly test whether the server meets their requirements. First, you need to test the speed of the server. The first way is the best way. Ping value:
Target IP address or domain name
Start menu - Run - Input CMD - In DOS interface input "ping IP - t"
Note that without -t ping value only has four parameters, -t parameter means that ping will continue forever until you stop manually Ctrl + C.
The second method is to test the route tracert router
This shows how long it takes to reach the target server by passing through many routers, and then you can see which router is slow based on the millisecond number of each route. You can even see the IP of the operator of that province or city through ip nslookup, so you can clearly understand this.
The third method is also used most often. It is very simple. First, know your maximum download speed when using ADSL, if you have a maximum of 2Mbps, the theoretical maximum download speed is 2 * 1024 / 8 = 256KB, and the actual maximum download speed is above 200KB. If you use a 512Kbps ADSL line, it usually reaches a peak at around 50-60KB.
When testing, find files larger than 50MB and take a longer time. Use single-threaded downloading, mainly watch the average value. If it can reach the maximum download speed of the network mode and maintain a certain range, it can be said to be stable.